Hempire Atmos™ · Retrofit surface system
A retrofit hemp surface for intelligent rooms.
Hempire Atmos brings the texture, warmth, and traceability of hemp-based materials into rooms that are already built — without positioning the product as a deep insulation wall or structural assembly.
Samples available · room reviews open
Existing wall
Drywall · plaster · masonry
Mounting rail
No demolition
Hemp surface
Acoustic + tactile face
Finish
Linen · core · oak
Trace™ tag
QR / NFC passport
What it is
A premium retrofit hemp surface system for calmer, warmer, more traceable interiors.
Atmos mounts over your existing drywall, plaster, masonry, concrete, or wood on a low-profile rail — no cavity work, no demolition, a visible result in days. It carries most of the everyday benefits people feel in a room: quieter acoustics, tactile warmth, softer light, and a material you can trace. Where you genuinely need insulation, we'll point you to a deep hemp-lime wall instead.
The honest distinction
A retrofit surface — not a deep insulation wall.
New build or heavy remodel
Deep hemp-lime wall
- Built inside new or heavily remodelled walls
- True insulation & thermal mass (R-value)
- Whole-building energy performance
- A construction project
Retrofit over finished walls
Hempire Atmos™ surface
- Installed over your existing finished walls
- Surface warmth, comfort & acoustics
- Quieter, healthier, more beautiful rooms
- No demolition — a visible result in days
This guide is about this one
Most everyday benefits — sound, air, comfort, beauty — belong to the retrofit surface. Where you genuinely need insulation and thermal mass, a deep hemp-lime assembly is the right tool, and we'll tell you so rather than overselling a thin surface.
Benefit fit
What Atmos does best.
The benefits a retrofit surface carries most strongly — each with its honest evidence status. Open any one for the full explanation and its limits.
- 01Tested per product
Acoustic absorption
Rooms that sound as good as they look.
Full detail → - 06Material
Tactile warmth
Surfaces that feel warm to the touch.
Full detail → - 08Design
Softer light, less glare
Light that flatters the room.
Full detail → - 09Design
Biophilic wellbeing
The quiet comfort of natural material.
Full detail → - 17Design
Retrofit-ready — no demolition
Upgrade the room you already have.
Full detail → - 18Design
Design freedom & customization
Yours, not off-the-shelf.
Full detail → - 19Design
Removable, repairable, replaceable
Serviceable by design.
Full detail → - 20Deployment
Material transparency & traceability
Know exactly what's on your wall.
Full detail → - 22Design
Premium differentiation
A story guests can see and feel.
Full detail → - 16Documented
Responsible end-of-life
Designed for what comes after.
Full detail →
Measured to your room
Planned for the wall you already have.
Atmos is measured to your room, not sold by the box. We take the wall you have, plan a layout of 24″ × 48″ hemp surface panels over it, and mount them on a low-profile rail — a removable, serviceable face with a Trace™ passport, no demolition.
An 8′ × 8′ wall, for example, is eight panels — about 64 sq ft of continuous surface. Enter your own dimensions in the Studio to see the panel count, coverage, and a planning estimate.
Measure
Your existing wall
Plan
8 panels · ≈64 sq ft
Rail-mount
Low-profile · removable
Trace™ tag
QR / NFC passport
Installation
Installed without demolition.
- 01
Substrate check
We confirm the existing wall — drywall, plaster, masonry, concrete, or wood — is a suitable, sound substrate.
- 02
Mounting rail
A low-profile rail or cleat system is fixed to the existing surface. No cavity work, no demolition.
- 03
Atmos panel
Hemp surface panels mount to the rail as a continuous, serviceable face — individually removable later.
- 04
Finish
The chosen finish — woven linen, fiber core, or oak slat — is completed for the room's palette and light.
- 05
Trace™ tag
A QR/NFC material passport tag is registered to the wall, so the surface carries its own record.
Finish & customization
Three finishes — or your own.
Hemp-Linen
A woven hemp-linen face. Soft, textile-like, warm ivory.
- surface
- Woven hemp-linen
- texture
- Soft · textile
- light
- Diffuse · warm
Fiber Core
The compressed hemp-fiber core, left raw. Matte and mineral-speckled.
- surface
- Compressed fiber
- texture
- Matte · speckled
- light
- Low · even
Oak Slat
Oak slats over a hemp core. Linear, architectural, directional.
- surface
- Oak over hemp
- texture
- Linear · directional
- light
- Shadow-lined
Custom colours, textures, slat profiles, and CNC-cut geometry are available for signature projects and quoted per scope — the finish is tuned to a room's palette and light.
Traceable by design
Every surface carries its own record.
Each Atmos wall is registered to a Trace™ material passport — hemp source, binder, finish, batch, and install date, plus the test reports on file and care guidance. Tap or scan the tag, and the record travels with the room.
Material passport
HLV-PANEL-001
- Batch ID
- HP-202607-001
- Material stack
- Hemp hurd · hemp fiber · mineral binder
- Installation
- Interior wall
- Last event
- Passport issued · testing in progress
- Readiness
- Live today
Claims: Non-safety monitoring · interior, non-structural.
Grows into
Start with a sample or a room review.
Feel the finish in the hand, or talk through a wall for your space — and, when you're ready, the same surface can grow into a smart wall.
Hempire Atmos is a retrofit interior surface system. Performance depends on product configuration, substrate, installation method, room conditions, and product-specific testing. It is not represented as a structural wall, fire-rated assembly, soundproofing system, life-safety system, or deep hemp-lime insulation wall.